How to Remove Magpul Stock: A Step-by-Step Guide for Beginners

Are you a firearm enthusiast looking to upgrade or customize your rifle? One popular modification is replacing the stock with a Magpul stock. Magpul stocks are known for their durability, versatility, and comfort. However, if you’re new to this process, removing the Magpul stock can be a bit intimidating. But fear not! In this comprehensive guide, we will walk you through the step-by-step process of how to remove a Magpul stock like a pro.

Before we dive into the details, let’s briefly discuss why you might want to remove your current stock and replace it with a Magpul stock. Magpul stocks offer better ergonomics and adjustability, allowing you to find a more comfortable shooting position. They also provide enhanced stability, reducing recoil and improving accuracy. Additionally, Magpul stocks often come with additional features like sling attachment points and storage compartments, adding functionality to your firearm.

Gathering the Necessary Tools

Before you begin the removal process, it’s essential to gather all the necessary tools. Having the right tools on hand will make the stock removal process much smoother and easier. Here are the tools you’ll need:

Screwdriver

A screwdriver with the appropriate size and tip type is necessary for removing screws that hold the stock in place. Make sure to choose a screwdriver that fits snugly into the screw head to avoid damaging the screw or slipping.

Allen Wrench

An Allen wrench, often referred to as a hex key, is commonly used to remove screws or bolts with hexagonal sockets. Many Magpul stocks utilize Allen screws, so having a set of Allen wrenches in different sizes will ensure you have the right tool for the job.

Punch Set

A punch set is essential for removing roll pins or other pins that may secure certain parts of the stock. These pins can be stubborn and difficult to remove without the proper tools. A punch set typically includes various sizes of punches to accommodate different pin sizes.

Once you have these tools ready, you can proceed with confidence knowing that you have everything you need to successfully remove your Magpul stock.

Unloading and Ensuring Firearm Safety

Prioritizing safety is crucial when working with firearms. Before starting the stock removal process, it’s essential to ensure that your firearm is unloaded and in a safe condition. Here are the steps to follow:

Unload the Firearm

Begin by removing the magazine from your firearm if it is still inserted. Check that the chamber is empty by pulling the bolt or slide back and visually inspecting the chamber. Ensure there is no live ammunition present.

READ :  How to Remove Dexcom Transmitter: A Step-by-Step Guide for Easy Removal

Visually Inspect the Chamber

After unloading the firearm, visually inspect the chamber to ensure there are no obstructions or debris. This step is crucial to prevent any accidental discharges during the stock removal process. Use a flashlight if necessary to get a clear view of the chamber.

Safety First

Always prioritize safety when handling firearms. Keep your finger off the trigger and point the firearm in a safe direction, away from yourself and others, throughout the stock removal process. Treat every firearm as if it were loaded, even if you believe it is unloaded.

By following these safety measures, you can minimize the risk of accidents and focus on the task at hand with confidence and peace of mind.

Removing the Buttstock

The next step involves removing the old stock from your firearm. This section will provide detailed instructions on how to detach the buttstock from the receiver using the appropriate tools.

Remove the Recoil Pad

Begin by locating the recoil pad on the buttstock. Depending on the specific Magpul stock model, the recoil pad may be held in place by screws or other fasteners. Use the appropriate screwdriver or tool to remove these screws and detach the recoil pad from the stock.

Loosen the Screws

Once the recoil pad is removed, you will see the screws that secure the stock to the buffer tube or receiver. Take note of the type of screws used and choose the appropriate screwdriver or Allen wrench. Insert the tool into the screw head and turn counterclockwise to loosen the screws.

Detach the Stock from the Buffer Tube

Once the screws are loosened, you can now detach the stock from the buffer tube or receiver. Carefully slide the stock off the buffer tube while supporting the firearm. Be mindful of any wires or cables that may be connected to the stock and gently disconnect them if necessary.

Inspect for Additional Fasteners

Some Magpul stocks may have additional fasteners or retention devices that secure the stock to the firearm. Take a close look at the stock and receiver to ensure there are no hidden screws, pins, or other mechanisms holding the stock in place. If you encounter any additional fasteners, use the appropriate tools to remove them.

By following these steps, you can safely and effectively remove the old stock from your firearm, making way for the installation of your new Magpul stock.

Detaching the Pistol Grip

In this section, we will focus on removing the pistol grip from your firearm. The pistol grip is typically located below the stock and may need to be detached before installing the new Magpul stock. Follow these steps to remove the pistol grip:

Loosen the Grip Screws

Start by identifying the screws that secure the pistol grip to the receiver. These screws are usually located at the bottom of the grip. Use the appropriate screwdriver or Allen wrench to loosen the screws by turning them counterclockwise. Take care not to strip the screw heads or apply excessive force.

Disconnect Any Wiring

In some cases, the pistol grip may have wiring or cables connected to it, such as those for a semi-automatic firearm’s fire control group. Before fully removing the grip, check for any wiring connections and gently disconnect them if necessary. Take note of the wire routing to ensure proper reconnection later.

Remove the Pistol Grip

With the screws loosened and any wiring disconnected, you can now remove the pistol grip from the receiver. Gently lift the grip away from the receiver while ensuring that no wires or cables are still attached. If the grip feels stuck, wiggle it slightly to loosen it before lifting it off completely.

READ :  How to Remove a Buffer Tube: A Step-by-Step Guide for Beginners

Removing the pistol grip is an important step in the stock removal process, as it allows for a complete replacement or customization of your rifle’s stock assembly.

Removing the Handguard

If you plan to replace the handguard along with the stock, this section is for you. We will walk you through the process of removing the handguard, allowing you to install a new Magpul handguard if desired.

Remove Any Accessories

Before removing the handguard, check if there are any accessories attached, such as rail covers, optics, or sling mounts. Remove these accessories first to make the handguard removal easier and prevent any damage to them.

Loosen the Handguard Screws or Bolts

Inspect the handguard to identify the screws or bolts that secure it to the barrel nut or receiver. Depending on the model and configuration, you may need a screwdriver or Allen wrench to loosen these fasteners. Turn them counterclockwise until they are sufficiently loosened but not completely removed.

Slide Off the Handguard

Once the screws or bolts are loosened, you can now slide the handguard off the barrel nut or receiver. Apply gentle pressure and wiggle the handguard if necessary to ease its removal. Be mindful of any wires or cables that may be routed through the handguard and ensure they are carefully disengaged.

Removing the handguard allows for further customization and the installation of a new Magpul handguard, enhancing the overall look and functionality of your rifle.

Installing the Magpul Stock

After removing all the necessary components, it’s time to install your new Magpul stock. Follow these step-by-step instructions to ensure a secure and proper attachment:

Align the Stock

Begin by aligning the Magpul stock with the buffer tube or receiver. Ensure that the stock is oriented correctly and that any attachment points or features are facing the desired direction. Aligning the stock properly at this stage will make the installation process smoother.

Tighten the Screws

Once the stock is aligned, locate the screws that secure it to the buffer tube or receiver. Insert the appropriate screwdriver or Allen wrench into the screw heads and turn them clockwise to tighten. Start with a snug fit, and then apply additional torque as needed to ensure a secure attachment. Avoid over-tightening, as it may cause damage or strip the threads.

Verify Stability

After tightening the screws, check the stability of the stock by gently applying pressure in different directions. Ensure that there are no noticeable movements or wobbling. A properly installed Magpul stock should be secure and stable, providinga solid foundation for your firearm.

Check for Proper Functionality

Once the stock is securely attached, test its functionality. Move the stock back and forth to ensure smooth adjustment and locking in different positions, if applicable. Check any additional features, such as sling attachment points or storage compartments, to ensure they are functioning correctly. Performing this check will ensure that your new Magpul stock is fully operational and ready for use.

Reassembling the Pistol Grip and Handguard

Now that you have successfully installed the Magpul stock, it’s time to reassemble the pistol grip and handguard. Follow these steps to complete the process:

Attach the Pistol Grip

Start by aligning the screw holes on the pistol grip with the corresponding holes on the receiver. Insert the screws that secure the grip and use the appropriate screwdriver or Allen wrench to tighten them. Make sure the grip is snugly in place, but avoid over-tightening, as it may damage the grip or strip the screw threads.

READ :  How to Remove Branch: The Ultimate Guide to Safely Pruning Trees

Reconnect Any Wiring

If you had to disconnect any wiring from the pistol grip, now is the time to reconnect them. Refer to your firearm’s manual or schematic diagram to ensure proper wire routing and connection. Take care to avoid pinching or damaging the wires during reconnection.

Slide On the Handguard

Align the handguard with the barrel nut or receiver and slide it onto the respective mounting point. Apply even pressure and wiggle the handguard if needed to ensure a proper fit. Check that any retention screws or bolts line up with the corresponding holes and tighten them to secure the handguard in place.

By reassembling the pistol grip and handguard, you are restoring your firearm to its original configuration or completing the installation of additional Magpul components for a customized look and enhanced functionality.

Performing a Function Check

Ensuring that your firearm operates safely and correctly is crucial. After installing your new Magpul stock, it’s essential to perform a function check to verify that everything is in proper working order. Follow these steps:

Check the Trigger

Ensure that the trigger functions as intended. Pull the trigger and observe if it releases the firing mechanism smoothly. Note any irregularities, such as a gritty or stuck trigger, and address them accordingly.

Test the Safety

Engage and disengage the safety selector to make sure it operates correctly. The safety should block the trigger from being pulled when engaged and allow the trigger to move freely when disengaged. Confirm that the safety engages and disengages smoothly and securely.

Verify the Bolt Catch

Check the bolt catch or release mechanism to ensure it functions properly. Lock the bolt back, then press on the bolt catch to release it. The bolt should spring forward and be ready for the next round to be chambered. Test the bolt catch a few times to ensure consistent and reliable operation.

Performing a function check is essential to guarantee the safe and reliable operation of your firearm after installing the new Magpul stock. If you encounter any issues during the function check, consult a professional gunsmith or refer to your firearm’s manual for troubleshooting guidance.

Final Thoughts and Additional Tips

As we reach the end of this guide, here are some final thoughts and additional tips to help you successfully remove a Magpul stock:

Maintain Proper Maintenance

Regularly clean and maintain your Magpul stock to ensure its longevity and optimal performance. Follow the manufacturer’s recommendations for cleaning and lubrication to keep your stock in top condition.

Consider Customization Options

Magpul offers a wide range of accessories and add-ons that can further enhance your firearm’s functionality and aesthetics. Explore the various customization options available, such as rail sections, sling mounts, and storage compartments, to tailor your rifle to your specific needs and preferences.

Seek Professional Assistance if Needed

If you’re unsure about any step in the stock removal process or encounter difficulties, it’s always best to seek guidance from a professional gunsmith. They have the expertise and experience to ensure a safe and successful installation of your Magpul stock.

With this comprehensive guide, you now have the knowledge and confidence to remove your old stock and install a new Magpul stock on your firearm. By following the step-by-step instructions and prioritizing safety, you can enjoy the benefits of improved ergonomics, stability, and functionality that a Magpul stock provides. Take your time, be patient, and enjoy the process of customizing and optimizing your rifle to fit your shooting style and preferences.

Leave a Comment